Cleaning the cell (QS200, QS400)

To keep the electrodes working optimally, it is necessary to clean them manually at regular intervals. You can clean the electrode according the step-by-step plan below:

Step 1:

Switch off the saltwater system and remove the plug from the outlet

Step 2:

Unscrew the inlet and outlet on the inside of the pool. Put the (black) plugs in the openings

Step 3:

Disconnect the 2 hoses from the saltwater system (see figure 1-3)

Step 4:

Loosen the swivel of the titanium electrode and disconnect the titanium electrode plug (see figure 4)

Step 5:

Loosen the cell nut and remove the titanium electrode from the cell housing (see figure 5)

Step 6:

Place the titanium electrode in a container and pour cleaning vinegar/kitchen vinegar into the container until the titanium electrode is fully submerged. Allow the plates to soak for at least 1 hour. For severe deposits, an overnight soak is recommended. Then rinse the electrode under the tap or with a garden hose (see figure 6)

Step 7:

Put everything back together by going steps 3-6 in reverse order.